Trimec ES8100 V-Lock

Trimec ES8100 V-LockTrimec ES8000 V Lock The unique and popular Trimec ES8000 V Lock has been completely redesigned and engineered to produce the new ASSA ABLOY ES8100 V Lock. Key Features: Unlocks under a Pre Load of up to 100kg in 3 wire mode, 15kg in 2 wire mode Locks under a Pre Load of 20kg (12W) and 35kg (24W) 1000kg Holding Force IP53 rated for external door applications Door Position and Lock Status Monitoring On Board visual Lock Status indication and

Trimec ES8000 V-Lock

The unique and popular Trimec ES8000 V-Lock has been completely redesigned and engineered to produce the new ASSA ABLOY ES8100 V-Lock.

Key Features:

• Unlocks under a Pre-Load of up to 100kg in 3-wire mode, 15kg in 2-wire mode 
• Locks under a Pre-Load of 20kg (12W) and 35kg (24W)
• 1000kg Holding Force
• IP53 rated for external door applications
• Door Position and Lock Status Monitoring
• On-Board visual Lock Status indication and diagnostics LED
• Easy, one-step, Fail Safe (PTL) and Fail Secure (PTO) field selection
• May be mounted vertically or horizontally (must not be mounted in the floor)
• Allows for door misalignment of up to 12mm total (+/-6mm)
• Operating voltage: 11.4 - 26VDC
• Durability tested to 500,000 cycles (120N unlocking, 50N locking)

Applications:

• Single and double swing hinge doors
• Doors subject to side load (pre-load)
• Misaligned doors
• Glass doors
• Suitable for use with access control, intercom, keypad and card reader systems and doors requiring door position monitoring

ES8000 V-Lock Technical Information:

• Voltage: 12 to 24Vdc, Voltage Tolerance 12V (+15% - 0%) 24V(+/- 15%)
• Current: Minimum 1 Amp Regulated Supply
• Monitoring: COM, NO, NC Voltage free changeover contacts rated at 48 dc/100mA)
• Security: Passed S3 (AS4145.2- 1993) 
• Strength: Maximum 1000kg (with supported strike plate) 
• Side Load: Side Load rated: Motorised Unlocking – 15kg max at bolt. Fail Safe Unlocking – 3kg max at bolt
• Endurance: 300,000 operations
• Environment: Operational temperature range -20°C to + 60°C
• Lock Body: Stainless Steel Lock Body and Faceplate
• Bolt: 11mm diameter, 20.5mm projection

Specification Statement:
The lock must be a high torque motorised bolt with Preload tolerance. The strike plate must be shaped in a V format to accommodate for misaligned doors. Lock will unlock with up to15kg of side pressure and will be powered with
12-24v and draw no more than 1000mA. The lock must be configurable for Power to Lock (Fail Safe) or Power to  Open (Fail Secure). The lock must be triggered with a magnet positioned in strike plate, and be monitored  for locked unlocked and door position.


Click here for the Trimec Data Sheet