Engineer Inc. PA-24 Micro Connector Crimping Pliers

Engineer Inc. PA-24 Micro Connector Crimping Pliers***SAVE ON SHIPPING COSTS FREE SHIPPING FOR A LIMITED TIME ONLY*** With the Micro Connector Crimping Pliers, you can perfectly crimp triangular insulation barrels (lugs) of DuPont (Servo) connector, Molex C Grid III, etc., without damaging the insulations. Its built in screw cutter allows you to cut down screws of M2, M2. 6 & M3 sizes. Tapered and slender jaws allow for excellent performance in crimps of different sizes within the same press operation

***SAVE ON SHIPPING COSTS - FREE SHIPPING FOR A LIMITED TIME ONLY***

With the Micro Connector Crimping Pliers, you can perfectly crimp triangular insulation barrels (lugs) of DuPont (Servo) connector, Molex C-Grid III, etc., without damaging the insulations. Its built-in screw cutter allows you to cut down screws of M2, M2.6 & M3 sizes. Tapered and slender jaws allow for excellent performance in crimps of different sizes within the same press operation and improve cable management with less chance of damage. It is spring-loaded on the back side with a locking latch for easy handling.

Features

• M-shaped Dies [1.3, 1.6, 1.9 & 2.2mm in width]: The conductor barrel can be crimped securely. The insulation barrel can be curled up very tidily.

• Round Dies (For DuPont contact etc.) [?1.4 & ?1.8mm]: Wrap triangular barrel lugs around the insulation without damage.

• More than 170 different terminals are applicable

• The specialty 2.5mm pitch connector works with JST XH, PH, EH & NH series, Molex Micro-Fit, KK series, etc. AWG #32-#18

• The light weight of 115g only

Specifications

Item No.: PA-24
M-Shaped Die Width (mm): 1.3, 2.6, 1.9, 2.2
M-Shaped Die Height (mm): 0.5, 0.7, 0.8, 0.9
Round Die Diameter (mm): 1.4, 1.8
Wire (AWG): #18 to #32