Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Outer Tie Rod End Set (Female) for Nissan Navara - TR05965Vehicle Fitment & Part Details This outer tie rod end set (female) is listed for the Nissan Navara (2005 ). It is supplied with RHT M16 x 1. 5 thread. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN engine. Key Details SKU TR05965 Component Outer Tie Rod End (Female) Position Front Axle, Outer Configuration Set Drivetrain 4x2, 4x4 OEM References 48520EA01J, 48520EA026, 48640EA01J,
Vehicle Fitment & Part Details
This outer tie rod end set (female) is listed for the Nissan Navara (2005-). It is supplied with RHT M16 x 1.5 thread. Confirm compatibility by matching the listed fitment details and any OEM reference numbers supplied. Verify VIN/engine.
Key Details
- SKU
- TR05965
- Component
- Outer Tie Rod End (Female)
- Position
- Front Axle, Outer
- Configuration
- Set
- Drivetrain
- 4x2, 4x4
- OEM References
- 48520EA01J, 48520EA026, 48640EA01J, 48640EA026
- Primary Fitment
- Nissan Navara (2005-)
- Specs
- RHT M16 x 1.5 thread
Listing Highlights
- Listed for selected Nissan Navara applications shown in the fitment table.
- Front axle outer tie rod end (female type) with RHT M16 x 1.5 thread.
Product Specifications
| Specification | Value |
|---|---|
| Fitting Position | Front Axle, Outer |
| Type | Female |
| Thread Size | RHT M16 x 1.5 |
Vehicle Fitment
Includes 2 supplied applications covering Nissan Navara, Nissan Pathfinder. Use the full table below to confirm model, engine option and year range before ordering.
| Make | Model / Application | Year Range |
|---|---|---|
| Nissan | Navara 4X2, 4X4 2.5dCi, D/C P/up, 4.0i V6 D/C P/up | 2005- |
| Nissan | Pathfinder 4X2, 4X4 2.5dCi, LE D/C SUV, P/up, 4.0i, LE V6 D/C SUV, P/up | 2005- |
Fitment Notes
- Always match the listed vehicle details before ordering. Verify VIN/engine.
- Open-ended dates, such as "2005-", reflect supplier catalogue data and must be confirmed against the vehicle before ordering.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering.
- Match the supplied dimensions to your original part, including the RHT M16 x 1.5 thread.
- This female outer tie rod end is supplied as a set. Confirm the type, position and quantity you require before ordering.
- Fitment data may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this outer tie rod end set (female) fit my Nissan Navara?
This part (TR05965) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
Is this sold as a single unit or a set?
This listing is sold as a set. Confirm the quantity and type you require before ordering.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, thread and taper sizes, and original part details before ordering. Verify VIN/engine.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 266 reviews
Sort
Product Reviews
★★★★★ 4
Short
Size: 8 cube
Little bit shorter than what I thought it would be but it was not hard to put together and I like it
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
★★★★★ 5
Nice entry way table
Size: 8 cube, Size: 8 cube
Great-looking 8 cube organizer with a really nice finish. The color is beautiful, and the top has a slightly matte stain that gives it a clean, modern look without being too shiny.
Assembly does take two people at certain points, as you’ll need someone to hold pieces in place while aligning and securing them. Not difficult overall, just easier with an extra set of hands.
It’s a bit shorter than a typical entry table, but the width is great and it offers plenty of storage space. Perfect for organizing baskets, shoes, or everyday items while still looking stylish.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
★★★★★ 5
Anyone with multiple monitors should buy this
I have been wanting something like this for years. I use three monitors, and keeping them all aligned is impossible. I've considered using tape, but that seems like it would lead to a sticky mess and it would never hold well. I imagined some solution with magnets, but never came up with anything that I thought I could implement myself.
As soon as I saw this product, I was ordered two sets. I knew that this was either going to be a revolution, or a huge disappointment. It was not a disappointment.
Installation is simple as can be, clean off your monitor back with some alcohol wipes (they should consider including some, would be a nice touch). For my screens, alignment was super easy because they have really square corners so I just stuck my aligners right at the corners and it worked great. For a screen with a curved back or something more geometric you probably want to get the screens in place first, then stick both parts at the same time. Either way, they stuck really well and the pads are flexible so they would work on a curved back just as well as flat.
The brackets also have a locking part that allows you to slide them side to side a bit giving you more flexibility in mounting, and then you can lock them down once everything is lined up so they hold nice and firm. I also managed to screw up and put the wrong part on the wrong side, but luckily if you unlock the bracket you can slide the main part off of the adhesive part completely, so I was able to simply swap the two main parts without needing to peel the adhesive part off. It's a well thought out design and I was impressed by just how much flexibility there was in the mounting solution while still allowing for a very easy installation and rigid final setup.
The magnets are strong, strong enough that if I needed to move a monitor regularly it would actually be annoying because while you can definitely take these apart they hold way too well to be doing so all the time. These are clearly intended for a permanent installation, without making it overly difficult to take things apart if you have to. If you have to turn a screen often though, such as to show something to a client or make the screen visible from another area of the room, I'm not sure if these will be what you need as they don't just come apart easily. If you want your screens to stay where you put them though, they are awesome!
For me, these were perfect, and based on the design I think they should work well for most monitors and most setups. I'm so glad this product exists, it was well worth the money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 10, 2025
★★★★★ 5
Great product!!!
I feel the price is a little high, but the product is amazing! Works just as described!!! I will be purchasing another set for the bottom of my work monitors. Currently their is just 1 set keeping these level.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
★★★★★ 5
I'd give 10 stars if I could
Holy cow! This is it!
For YEARS I've been looking for a product that would align the bezels on my monitors. I found this product by scrolling through reels and then found the link to Amazon. The price was steep and I was hesitant, but I took the gamble and I'm so glad I did.
Installation is slightly confusing, and you really want to know how this works before you adhere it to any surface. I'll break it down for you:
Align your monitors flat next to each other. Attach one side with the adhesive, then snap the other side on with the magnet. Peel that adhesive strip and lay it on your second monitor so that they are even. Repeat for the bottom. Twist the U shape up for the left, down for the right. Adjust your angle and then lock them by putting the U shape back to how it was. That's it.
The stability on these simple magnets is excellent. I went from a wobbly mount to locked in and only moving when I want it to. I'm so happy this product exists.
That's German engineering for you. 💪💪
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
recommand products
Fits 2012-18 Mercedes-Benz CLS550 EPA Compliant Catalytic Converter 21-564-FBHB
332.50
2003 Hyundai Elantra Direct-Fit Catalytic Converter 5671418 Magnaflow
464.00
2011-2017 Audi Q5 Direct-Fit Catalytic Converter 5551352 Magnaflow
1204.00
2012-2017 Fiat 500 OEM Grade Federal Catalytic Converter 22-059 Magnaflow
438.50
2006-09 Ford Fusion CARB Compliant Manifold Cat Converter 5531388 Magnaflow
502.00